Sony MDS-PC1 Recording on an MD, Press, to record, Basic Operations, Insert a recordable MD, The STANDBY indicator turns off, Set INPUT to the corresponding input connector

Basic Operations

Recording on an MD

2 3 8 6

STANDBY				§￿	fl￿ p		r
					=AMS +
PHONE LEVEL		TIMER		EDIT/NO	YES	PUSH ENTER
		REC OFF PLAY
		DISPLAY/	)
		CHAR
MIN	MAX			REC MODE	INPUT
PHONES		CONTROL A1				REC LEVEL
				STEREO MONO	DIGITAL ANALOG
		PLAY MODE	0
						0	10

When “REMOTE” appears in the display

The deck is set to be operated from the connected personal computer. You cannot operate the deck from the buttons on the front panel or remote.

To use the buttons on the front panel or remote, quit the MD editor application, turn off the deck, then turn it back on.

Note for European models

Be sure to set MAIN POWER on the rear of the unit to ON before using the unit.

Monitor audio during recording

Even if you set REC MODE to MONO, the monitor signal does not become monaural.

8EN

		5 4 7
1		Turn on the amplifier and play the program source you want
		to record.
2		Press	.
		The STANDBY indicator turns off.
	3	Insert a recordable MD.

With the label side up

With the arrow pointing this way

If the MD has a recorded material on it, the deck will automatically start recording from the end of the last recorded track.

4	Set INPUT to the corresponding input connector.
	To record through	Set INPUT to
	DIGITAL IN	DIGITAL
	LINE (ANALOG) IN	ANALOG

5	Set REC MODE to the mode you want to record in.
	To record in		Set REC MODE*1 to
	Stereo sound		STEREO
	Monaural sound*2		MONO
	*1	If you switch REC MODE during recording or recording pause, recording
		stops.
	*2	In the monaural recording, you can record about two times longer than in
		the stereo recording.