When you directly locate a track with a number over

25Z

You must press >25 first, before entering the corresponding digits.

Press >25 once if it is a 2-digit track number, and twice if it is a 3-digit track number.

To enter “0,” press button 10. Examples: • To play track number 30

Press >25 once, then 3 and 10.

•To play track number 100

Press >25 twice, then 1, 10 and 10.

You can extend the playing time during music scan

1While the deck is stopped, press EDIT/NO twice to display “Setup Menu”.

2Turn AMS to select “M.Scan Menu”, then press AMS.

3Turn AMS to select the playing time within a range of 6 to 20 seconds (in 1 second steps), then press AMS.

4Press EDIT/NO.

To pause playing at the beginning of a track

Turn AMS (or press =or +) after pausing playback.

To go quickly to the beginning of the last track

Turn AMS counterclockwise (or press =) while the display shows the total track number and total disc playing time, remaining recordable time of the disc, or disc name (see page 19).

Playing MDs

Locating a Particular Point in a Track

You can also use 0and )to locate a particular point in a track during playback or playback pause.

§￿ fl￿ p r

= +

)

0

 

0/)

 

 

To locate a point

Press

 

 

While monitoring the

)(forward) or 0(backward)

sound

and keep pressing until you find

 

the point.

 

 

Quickly by observing the

)or 0and keep pressing

display during playback

until you find the point. There is

pause

no sound output during this

 

operation.

 

 

zIf “—Over—” appears while you are pressing ) during playback pause

The disc has reached to its end. Press 0(or =) or turn AMS counterclockwise to go back.

Notes

•If the disc reaches the end while you are pressing ) during sound monitoring, the deck stops.

•Tracks that are only a few seconds long may be too short to scan using the search function. For such tracks, it is better to play the MD at normal speed.

21EN