![](/images/backgrounds/22032/22032-13217x1.png)
6Press STOP to stop
To pause recording
Press STANDBY or CD PLAYER P.
To restart recording, press START or CD PLAYER P. A new track number is marked each time you pause recording.
Notes
•When the deck’s remote controls the CD player with a mode selector, set the selector to CD1.
•The deck may not automatically mark track numbers when recording from some CD players and multi disc players.
zYou can use the remote of the CD player during
When you press p, the CD player stops and the deck pauses for recording.
When you press P, the CD player pauses and the deck pauses for recording.
To restart
zYou can change CDs during
Do the following steps instead of Step 6 above.
1Press pon the remote of the CD player. The deck pauses for recording.
2Change the CD.
3Press ·on the remote of the CD player.
zYou can also do
Using the procedure for
To select the video CD player, press button number 2
while pressing down the button on the remote before starting the procedure.
To select the CD player again, press button number 1
while pressing down the button.
The deck is factory set to a CD player for synchro- recording.
zYou can check the remaining recordable time on the
MD
Press DISPLAY/CHAR (see page 19).
zYou can copy CD titles automatically during synchro- recording (Track Name Copy)
By connecting your deck to a Sony CD player with CONTROL A1 cable, you can copy the
During the
Recording on MDs
When | display |
there are no track | “NO NAME” |
names on the CD |
|
|
|
copy of TEXT | “TEXT PROTECT” |
information is |
|
prohibited |
|
|
|
the maximum | “NAME FULL” |
number of titles |
|
has been stored |
|
in the MD |
|
|
|
Note
You cannot use Track Name Copy function when recording over an existing track.