English
Our products are engineered to meet the highest standards of Quality, functionality and design. We hope you thoroughly enjoy your new Braun appliance.
Please read the use instructions carefully before first use.
Important
•The blades L/N are very 
sharp!
Take hold of the blades by the knob only. After use, always first remove the blades from the bowls 7/J before removing the processed food.
•Make sure that your voltage corre sponds to the voltage printed on the bottom of the appliance. Connect to alternating current only.
•Keep the appliance out of the reach of children.
•This appliance is not intended for use by children or persons with reduced physical, sensory or mental capabilities, unless they are given supervision by a person responsible for their safety. In general, we recom mend that you keep the appliance out of reach of children. Children should be supervised to ensure that they do not play with the appliance.
•This appliance was constructed for household use only to process the listed quantities.
•Do not use any parts in the microwave oven.
•Make sure to avoid touching the running drives with your fingers. Put on the protective cover M whenever a drive place is not in use, since both drives rotate simultaneously when switching on the appliance.
•Do not allow the appliance to operate unsupervised.
•Braun electric appliances meet appli cable safety standards. Repairs or the replacement of the mains cord must only be done by authorised service personnel. Faulty, unqualified repair work may cause considerable hazards to the user.
•Switch the appliance off and discon nect it from the outlet before storing it.
Specifications
•Voltage/wattage: See typeplate on the bottom of the appliance.
•Operating time and max. capacity:
See processing instructions.
Description
The Braun Multiquick 5 with the
To obtain best results, two different working bowls are available: a large food processor bowl 7 and a small chopper bowl J.
Thus, for chopping, puréeing or mixing you can choose between the large and the small working bowl. Moreover, you can use the small bowl to prepare the food which then can be further proces sed in the large bowl (e.g. to chop nuts for a nut cake dough). Only one bowl can be operated at a time.
1Motor block
2 Cord storage
3 Motor switch (on = «I», off = «O»)
4 Pulse mode «P»
5 Variable speed regulator
6 Safety lock (avoids simultaneous operation of both working bowls)
7 Food processor bowl (2 l capacity)
8 Lid for food processor bowl 7
9 Pusher for lid 8
J Chopper/mixer bowl for small tquantities (0.75 l capacity)
q Lid for chopper bowl J ß11a Seal ring for lid q
L Blade for chopper bowl J
M Protective cover for motor drive when bowl has been taken off
Attachments for food processor bowl 7
(Important: Not all attachments will be included in the standard equipment of all models).
NBlade for food processor bowl 7 with protective cover
OInsert carrier
PFine slicing insert – a Q Coarse slicing insert – b R Fine shredding insert – c
S Coarse shredding insert – d T Grating insert – e
U
W Whipping attachment
Note: Before using the food processor for the first time, clean all parts as described under «Cleaning».
Overload protection
In order to avoid damages caused by overload, this appliance is equipped with an automatic security switch which shuts off the current supply if necessary. In such case, turn the motor switch 3 back to «off/0» and wait approx. 15 min- utes to allow the motor to cool off before switching on the appliance again.
Pulse mode «P»
The pulse 4 mode is for example useful for the following applications:
•Chopping delicate and soft food, e.g., eggs, onions or parsley.
•Carefully folding flour into dough or batter to maintain the creaminess.
•Adding whipped eggs or cream to more solid food.
The pulse mode «P» is activated by pressing the blue knob 4 on the motor switch with switch setting «O».
Before activating the pulse mode, set the desired speed with the speed regu lator 5. When releasing the pulse knob 4, the appliance is switched off.
Recommended speed ranges for individual attachments
Set the speed range by means of the variable speed regulator 5. It is recom mended to first select the speed and then switch on the appliance in order to work with the desired speed right from the beginning.
Attachments | Speed range | |
|
|
|
Kneading hook | 7 |
|
Blade L and N | 6 | - 15 |
Whipping attachment: |
|
|
– | 4 | - 5 |
– cream | 2 |
|
Slicing, grating and |
|
|
shredding inserts | 1 | - 8 |
1 | - 2 | |
(please also refer to product printing)
Working with the 2-bowl system
Only one working bowl can be operated at a time.
The working bowl which is not used must be in the upper position or addi tionally, can be turned in the «click» direction where it is locked in place. When the arrow markings are aligned, the bowl can be taken off. For safety reasons, always put the protective cover
Monto the free drive shaft after a bowl has been taken off.
Double safety feature
The appliance can only be switched on when the desired working bowl with lid is properly engaged. If the lid is opened during operation, the motor switches off automatically. As in this case the motor switch 3 is still on «I», turn it back to «O» to avoid switching on the motor accidentally.
12
