Braun K 700 Attaching the working bowls, Using the food processor, Removing the working bowls

Attaching the working bowls

The food processor bowl 7 is operated on the large drive place of the motor block 1. The chopper bowl J is operat­­ ed on the small dirve place.

N.B.	Using the food processor
When attaching the lid q of the chopper	bowl 7
bowl J, it must be provided with the
seal ring ß.
11a	When using the food processor bowl,
	always insert the required attachments
	before adding ingredients.

1.With the motor switched off, place the respective bowl onto its drive place matching the arrow on the bowl with the arrow on the motor block (A).

A

	1	1
2		2

Then turn the bowl in the «function» direction until the lower fixed stop is reached. The bowl on the other drive place must be in the lifted position.

If the other drive place is free, put on the protective cover M.

2.Put the attachment needed (see instructions for each of the attachments) onto the drive shaft of the bowl and push it down as far as it will go (B).

B

pulse off/0

When inserting the blade L onto the chopper bowl J, push it down until it audibly snaps in place.

3. Put the lid onto the bowl matching the arrow on the lid with the arrow on the bowl (C).

1 C 1

2

pulse off/0

Then turn the lid clockwise guiding its nose into the safety lock opening of the motor block 1 until it audibly snaps in place.

Removing the working bowls

Switch off the appliance. Turn the lid anti-clockwise and lift it off. Then turn the bowl in the «click» direction until the arrow on the bowl matches the arrow on the motor block and lift off the bowl.

When removing the blade from a bowl, take hold of it by the knob and pull it off.

Caution: The blades are very sharp.

The blade N comes with a protective cover. If not in use, store the blade on the protective cover.

Cleaning

First, always switch off the motor and unplug the appliance. Clean the motor block 1 with a damp cloth only.

All parts can be cleaned in the dish­ washer. If necessary, clean all parts thoroughly with a spatula or a brush before rinsing them.

Color-intensive food (e.g. carrots) may leave stains on the plastic parts; wipe them off with cooking oil before cleaning with water.

For cleaning the lid q, first remove the seal ring ß11a . Put the seal ring back in place after cleaning. You can use the seal ring from both sides.

Do not use sharp objects for cleaning purposes.

Clean the blades and the inserts very carefully – they are very sharp.

1. Kneading

For kneading you can use the kneading hook V or the blade N. For best results, we recommend using the kneading hook which is specially designed for making yeast dough, pasta and pastries.

Yeast dough (bread/cake)

Max. 500 g flour plus other ingredients Speed 7, 1 ½ minutes

Pour the flour into the food processor bowl, then add the other ingredients – except liquids.

Put on the lid 8 and lock in place. Then choose speed 7 and switch the appliance on.

Add liquids by pouring them through the filling tube of the lid while the motor is running.

When kneading with the blade N, do not add ingredients like raisins, candied peel, almonds, etc. which are not supposed to be cut. These have to be added manually after having taken the kneaded dough out of the food proces­ sor bowl.

Pasta dough

Max. 500 g flour plus other ingredients Speed 7, 1 ½ minutes

Pour the flour into the food processor bowl, then add the other ingredients – except liquids.

Pour the required amount of liquid through the filling tube in the lid when the motor is running.

Do not add any liquid after the dough has formed into a ball as then the liquid will no longer be absorbed evently.

Pastries

Max. 500 g flour plus other ingredients Speed 7, approx. 1 minute

Pour flour into the food processor bowl, then add the other ingredients. For best results, be butter used must not be too hard, nor too soft.

Put on the lid 8 and lock in place. Choose speed 7 and switch on the appliance.

Stop kneading the dough shortly after a ball has formed. Otherwise the pastry dough will become too soft.

13