Sony MDS-PC1 Moving Recorded Tracks (MOVE Function), 32EN, (NAME Function), Labeling Recordings, To cancel the Move Function

Editing Recorded MDs

Moving Recorded Tracks (MOVE Function)

Use the Move Function to change the order of any track. After you move a track, the track numbers between the new and old track positions are automatically renumbered.

Example: Moving track C to track position 2

Track	1	2	3	4
number	A	B	C		D
Moving			Track C moves to
			track position 2
	1
		2	3	4
	A	C	B		D
				p	YES
			§￿	fl￿ p	r
				= +
			)
			0
		EDIT/NO		=AMS +

1While the deck is stopped, playing, or pausing, press EDIT/NO to display “Edit Menu”.

2Turn AMS until “Move ?” appears in the display.

3Press AMS or YES.

4Turn AMS to select the track to be moved and press AMS or YES.

5Turn AMS until the new track position appears.

New track position

Track number to be moved

6Press AMS or YES.

“Complete!!” appears for a few seconds and the moved track begins playing back.

To cancel the Move Function

Press EDIT/NO or p.

Labeling Recordings

(NAME Function)

You can create titles for your recorded MDs and tracks. Titles — which may consist of uppercase and lowercase letters, numbers and symbols for a maximum of about 1,700 characters per disc — appear in the display during MD operation. You can also use the remote to label a track or an MD (see “Labeling tracks and MDs with the remote” on page 34).

0/)	YES
§￿	fl￿ p r
	= +
)
0
DISPLAY/CHAR EDIT/NO	=AMS +

Use the following procedure to label a track or an MD.

You can label a track while it is playing, pausing or recording. If the track is recording, be sure to finish labeling before the track ends. If the track ends before you’ve completed the labeling procedure, the characters already entered are not recorded and the track will remain unlabeled.

1Press EDIT/NO to display “Edit Menu”.

2Turn AMS until “Name ?” appears in the display and press AMS or YES.

Skip this step while recording.

3Turn AMS until “Nm In ?” appears in the display, then press AMS or YES.

4Turn AMS to select “Disc” to label an MD, or to specify the track to label.

While recording, go to Step 6.

5Press AMS or YES.

A flashing cursor appears in the display.

32EN