1 Insert a recordable MD.
With the arrow pointing
toward the deck | § | • | • |
• |
| ||
|
| · |
|
With the label |
| 0 ) | |
| p |
| |
side up, sliding |
|
|
|
the tab |
|
|
|
rightward |
|
|
|
2 Press §OPEN/CLOSE and place a CD on the disc tray.
6 Press ·on the MD deck (or P on the remote).
Recording starts. The CD player stops and the MD deck pauses automatically when the recording is completed. If there is no remaining recording time on the MD, the MD deck stops.
To stop recording
Press pon the MD deck.
While “TOC” lights up or is
The disc tray opens.
With the label side up. When you play a single CD, place it on the inner circle of the tray.
0 )
p
§
·
0 )
p
flashing
Do not move the deck or pull out the power cord to ensure the complete recording. The deck is currently updating the Table Of Contents (TOC).
Tips
To place the third disc, press DISC SKIP (or D.SKIP on the remote) to rotate the disc tray.
3 Press DISC SKIP (or D.SKIP on the remote) repeatedly until the DISC 1 – 3 button you want lights green.
4 Press CD SYNC, then turn SELECTOR on the MD deck until “NORMAL ?” appears.
5 Press ENTER/YES.
The MD deck stands by for recording and the CD is in pause for playback.
•Inserting an MD when the power is off automatically turns the power on.
•The MD recording is complete only after all the recording information is entered to TOC at which point TOC stops flashing and goes out. Be careful not to disconnect the mains lead or move the deck before this point. Before disconnecting the mains lead, do the following:
–Remove the MD.
–Press SYSTEM POWER, to turn off the system.
Operations Basic
19EN