When you record from this system’s CD (digital recording), the track numbers are automatically marked. In addition, you can mark track numbers:
•At any point while recording.
•Automatically while analog recording.
Marking track numbers at a specific point while recording
You can mark track numbers at any time while recording, regardless of the type of sound source.
rREC
| • | • • |
§ | • | • |
• | • | |
EJECT | • | • |
=SELECTOR + | · | |
r REC |
0 )
p
§
Press rREC while recording at the point you want to add a track mark.
A track number is marked at that point.
Marking track numbers automatically while analog recording
Track numbers are automatically marked when the input signal continues to be under a certain level for more than two seconds and then returns to the previous level.
1 | 2 | 3,4 | 5 | |||
|
|
| • | • | • |
|
|
| § | • |
| • |
|
|
| • |
| • |
| |
|
| EJECT | • |
| • |
|
|
| =SELECTOR + | · |
| ||
r REC |
|
|
|
0 )
p
§
1 Press rREC.
The MD deck stands by for recording.
2 Press EDIT/NO repeatedly until “LevelSync ?” appears.
3 Press ENTER/YES.
“LevelSyncON?” appears.
4 Press ENTER/YES again.
5 Press ·(or Pon the remote).
Recording starts.
To cancel the track marking
1Press EDIT/NO repeatedly until “LevelSync ?” appears.
2Press ENTER/YES. “LevelSyncON?” appears.
3Press EDIT/NO.
In this way, a track number is marked only at the beginning.
Note
You cannot mark track numbers automatically if the sound source to be recorded is noisy (e.g., tapes or radio programs).
43EN