Programming the CD tracks (continued)
4 Turn SELECTOR until the desired track number appears.
Selected track Playing time
5 Press ENTER.
The track is programmed. The last programmed track appears, followed by the total playing time. If you have made a mistake, press CLEAR.
6 To program additional tracks, repeat steps 3 to 5.
Skip step 3 if you select a track from the same disc.
7 Press ·(or ·on the remote).
All the tracks play in the order you selected.
To check the total number of the programmed tracks
Press TIME in stop mode.
“Step” appears, followed by the total number of the programmed tracks.
To | Do this |
Cancel Program | Press CONTINUE. |
Play |
|
Clear a track | Press CLEAR. |
from the end |
|
(in stop mode) |
|
Add a track to | Do steps 3 to 5 in |
the program | “Programming the CD |
(in stop mode) | tracks.” |
Clear the entire | Press p once in stop mode. |
program |
|
|
|
Tips
•To program the entire CD as one step of the program, skip step 4.
•When you want to record the program, see “Recording the favorite CD tracks on an MD” (see page 38) or “Recording the favorite CD tracks on a tape” (see page 54).
•The program you made remains after the Program
Play has finished. To play the same program again, press ·. However, when you make a recording with the Hit Parade feature, the program is erased.
•The total playing time is not displayed when you select a track whose number is 21 or over, or the total program time exceeds 100 minutes.
30EN