3 Press DIRECTION repeatedly to select the side you want to record on.

Select A to record on one side. Select

Åor ato record on both sides.

4 Press rREC on the tape deck.

The tape deck stands by for recording. “PLAY ·P {REC}” (for front side) appears.

5 Start playing the source to be recorded.

6 Turn REC LEVEL to adjust the recording level.

While monitoring the sound at the highest level, adjust the recording level so that it falls within the range illustrated below.

When using a TYPE-I (normal) or TYPE-II (CrO2) tape

a

When using a TYPE-IV (metal) tape

7 Stop playing the source.

8 Press Por ·on the tape deck.

Recording starts.

9 Start playing the source to be recorded.

To

Press

Stop recording

pon the tape deck.

 

 

Pause recording

Pon the tape deck.

 

 

Tips

•Pressing SYSTEM POWER on the DHC-MD77/ EX77MD/EX770MD automatically turns on the TC-TX77/TX770 deck if you connect them to each other using the audio bus cable.

•If you want to record from the reverse side, press ª in step 4 so that “ªPLAY P{REC}” (for reverse side) appears.

•When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR repeatedly to select B or C before step 4. You cannot switch DOLBY NR during recording.

•If you press RESET, the counter display returns to “00 00.”

53EN