The Smart Space and Auto Cut functions let you make a blank space between tracks three seconds long automatically while making a digital recording.
Smart Space
There has been an extended silence of 4 to 30 seconds while digital recording.
The MD deck replaces the silence with a blank of about 3 seconds and continues recording.
Note that the tracks before and after this
Auto Cut
There has been no sound input for 30 seconds while digital recording.
The MD deck replaces the silence of 30 seconds with a blank of about 3 seconds and changes to recording pause.
The Smart Space and Auto Cut functions are both turned on at the same time. You cannot use one of these functions without the other.
1 | 2,3 | ||
|
| • | • • |
| § | • | • |
| • | • | |
| EJECT | • | • |
| =SELECTOR + | · | |
r REC |
| ||
|
| 0 | ) |
|
| p |
|
| § |
|
|
| OPEN/CLOSE |
|
|
=SELECTOR +
·
0 )
p
1 During recording pause, press EDIT/NO repeatedly until “S. Space ?” appears.
2 Press ENTER/YES within three seconds.
“S. Space ON?” appears.
3 Press ENTER/YES again.
“S. Space ON” appears.
When “Smart Space” appears during recording, the Smart Space function is activated. When “Auto Cut” appears, the Auto Cut function is activated.
To turn off the Smart Space and Auto Cut functions
1During recording pause, press EDIT/NO repeatedly until “S. Space ?” appears.
2Press ENTER/YES.
3Press EDIT/NO so that “S. Space OFF” appears.
Notes
•The Smart Space and Auto Cut functions are factory set to on.
•If you turn the power off or disconnect the AC power cord, the MD deck will recall the last setting (on or off) of the Smart Space and Auto Cut functions the next time you turn the power on.
42EN