Dividing recorded tracks

— Divide Function

You can use this function to add track numbers to multiple tracks that are recorded as one track. This function also lets you mark track numbers after the recording ends. The total number of tracks increases by one and all the tracks following the divided ones are renumbered.

Example: Dividing track 2 into tracks B and C.

Track

 

 

 

 

 

 

 

number

1

2

 

3

 

 

 

Original

 

 

 

 

A

B

 

C

 

D

tracks

 

 

 

 

 

 

 

 

 

 

 

 

 

Divide track 2 into

 

 

 

 

tracks B and C.

 

1

2

3

4

 

 

 

DIVIDE

A

B

 

C

 

D

 

 

 

2 SELECTOR

1

 

 

 

 

 

 

•

• •

 

 

 

 

§

•

 

•

 

 

 

 

•

 

•

 

 

 

 

EJECT

•

 

•

 

 

 

 

=SELECTOR +

· ￿

 

r REC

 

 

 

 

 

 

 

 

0

 

)

 

 

 

 

 

 

p

 

 

 

 

 

§

 

 

 

 

 

 

 

OPEN/CLOSE

 

 

 

 

 

 

 

3,40 )

 

 

 

 

=SELECTOR +

 

 

p

·￿

1 While playing the MD, press ·￿ (or Pon the remote) at the point to be divided.

The MD deck pauses.

2 Press EDIT/NO repeatedly until the selected track number and

“2 Divide ?” appear.

3 Press ENTER/YES.

“Rehearsal” and “Position ok?” appear alternately and the portion to be divided is played repeatedly.

To shift the position to be divided:

1Press EDIT/NO.

2While monitoring the sound, turn SELECTOR to the starting point to be divided.

You can check the display and shift the point between –128 and +127 (±01 is about 0.06 seconds).

To cancel the Divide Function at this time, press p.

4 Press ENTER/YES again when you find the point to be divided.

“Complete” appears for a few seconds and the newly created track begins playing.

Tip

You can also divide tracks while recording. Press

rREC at the desired point (see page 43).

Notes

•When “SHUFFLE” or “PROGRAM” appears in the display, press CONTINUE so that the indication disappears.

•The new track will have no track title even if the original track was labeled.

48EN