4 Place the sub woofer if you have connected an optional sub woofer.

To obtain a better bass reproduction, we recommend you to place the sub woofer on a solid floor where resonance is unlikely to occur.

Notes

Do not place the surround speakers on top of a TV. This may cause distortion of the colors in the TV screen.

If you place the center speaker on the unit, be sure to place it at the front side of the unit.

Always place the sub woofer vertically, keeping it a few centimeters away from the wall.

If the sub woofer is placed in the center of a room, the bass could be extremely weakened. This is due to the influence of the standing wave of the room. If this happens, move the sub woofer away from the center of the room or eliminate the cause of the standing wave, by placing a bookshelf against the wall, etc.

Speaker settings

To enjoy DVD VIDEOs and other discs with multi-channel sound and Dolby surround effects, the speakers need to be adjusted. Set the distance from the listening position to the speakers, and the speaker level. Then, use the test tone to adjust the volume of each speaker to the same level.

For details, see “Setting the speakers” on page 54.

Setting the clock

1 Press ?/1 to turn on the system.2 Press TIMER MENU.

The hour indication flashes in the display.

3 Press V or v repeatedly to set the hour.4 Press ENTER.

The minute indication flashes in the display.

5 Press V or v repeatedly to set the minute.6 Press ENTER.

The clock starts functioning.

To adjust the clock

1Press TIMER MENU.

2Press V or v repeatedly to select “CLOCK SET?”, then press ENTER.

The hour indication flashes in the display.

3Do the same procedure as steps 3 to 6 above.

Notes

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

You cannot set the clock in Power Saving Mode (page 76).

Started Getting

13GB