Sony MHC-WZ88D 75GB, Timer, Other operations, 8 Press ?/1 to turn off the system, 6 Load a recordable tape into deck B

6 Load a recordable tape into deck B.

Make sure the tape is in the front side.

7 Press DIRECTION on the unit repeatedly to select “g” to record on one side or “j” (or “RELAY”) to record on both sides.

When recording from the reverse side, press FUNCTION +/– (or TAPE A/B on the unit) repeatedly until “TAPE B” appears in the display. Then, press H (or hH on the unit) repeatedly until the TAPE B reverse side indicator lights up to start playback of reverse side. Press x at the point where you want to start recording.

When recording on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

8 Press ?/1 to turn off the system.

Other operations

To	Do this
Check the setting	1	Press TIMER MENU.
		“TIMER SEL?” appears in
		the display.
	2	Press ENTER.
	3	Press V or v repeatedly to
		select “REC SELECT?”,
		then press ENTER.
Change the setting	Start from step 1.
Cancel the Timer	1	Press TIMER MENU.
Recording		“TIMER SEL?” appears in
		the display.
	2	Press ENTER.
	3	Press V or v repeatedly to

select “TIMER OFF?”, then press ENTER.

Notes

•You cannot select the Play Timer and the Timer Recording at the same time.

•If you use the Timer Recording and the Sleep Timer at the same time, the Sleep Timer has priority.

•The Timer Recording will not be activated if the system is turned on or if “STANDBY” flashes in the display.

•The volume is reduced to minimum during Timer Recording.

•Do not operate the system from the time the system turns on until the recording starts (about 30 seconds before the preset time).

Tips

•The system turns on 30 seconds before the preset time.

•When Timer Recording is selected, “REC” lights up in the display.

Timer

75GB