Notes

•When you press REC PAUSE/START, the sound field is automatically changed to LINK if the headphones are not connected and HP 2CH if the headphones are connected.

•You cannot listen to other sources while recording.

•When you connect or disconnect a microphone or headphones during recording, the sound may cut off for a moment.

Tips

•When recording from the reverse side:

After step 1 of “Recording onto a tape manually”, press TAPE A/B repeatedly until “TAPE B” appears in the display. Press hH repeatedly until the TAPE B reverse side indicator lights up to start playback of the reverse side. Press x at the point you want to start recording.

•When recording on both sides:

Be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

•When recording from the radio:

If noise is heard while recording from the radio, move the respective antenna to reduce the noise.

•When recording from a disc onto a tape manually: You can press .m or M> (or . or > on the remote) repeatedly to select the tracks during recording pause mode (after step 4 and before step 6 of “Recording onto a tape manually”).

•When recording from the tape:

If you set the direction to “j” (or “RELAY”) when the tapes you use have different lengths, the tape in each deck reverses independently.

Sound Adjustment

Adjusting the sound

You can reinforce the bass and create a more powerful sound.

Use the buttons on the unit for the operation.

Press DSGX repeatedly.

Each time you press the button, the display changes as follows:

DSGX ON* y DSGX OFF

*The volume switches to power mode and the equalizer curve changes.

Tips

•The default setting is “DSGX ON”.

•“DSGX” lights up in the display if “DSGX ON” is selected.

64GB