4 Press ENTER.

A preset number flashes in the display. The stations are stored from preset number 1.

Preset number

STEREOTUNED

A j B

DSGX

5 Press PRESET +/– repeatedly to select the preset number you want.

6 Press ENTER.

“Complete!” appears in the display. The station is stored.

7 Repeat steps 1 to 6 to store other stations.Other operations

To

Do this

Tune in a station

Follow the procedure described

with a weak signal

in “Manual tuning preset”

 

(page 58).

 

 

Stop scanning

Press x.

during automatic

 

tuning

 

 

 

Cancel presetting

Press MENU.

 

 

To change the AM tuning interval (except for Saudi Arabian and Russian models)

Use the buttons on the unit for the operation. The factory settings for AM tuning interval is

9kHz (or 10 kHz for some areas). To change the AM tuning interval, select any AM station first, then turn off the system. While holding down x, press ?/1 to turn on the system. “AM 9k Step” or “AM 10k Step” appears in the display. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.

Note

You cannot change the AM tuning interval in Power Saving Mode (page 76).

Tips

The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs.

If you press TUNER/BAND on the unit while the system is turned off, the system turns on automatically and “TUNER” is selected as the function except during Power Saving Mode.

Tuner
59GB