ES VIDEO OUT jack

Use an S video cord (not supplied) to connect a TV to this jack. You can enjoy higher quality video images.

FCOMPONENT VIDEO OUT jacks

Use component video cords (not supplied) to connect a TV or projector to these jacks. If your TV accept progressive format signals, you must use this connection and press PROGRESSIVE on the unit repeatedly to select “P AUTO” or “P VIDEO”.

Listening to audio from a connected component

Listening to a connected VCR or satellite tuner

Use the buttons on the unit for the operation.

1 Connect the audio cords.

See “Hooking up optional components” on page 80.

2 Press VIDEO/SAT.To switch between the “VIDEO” and “SAT” function

Hold down VIDEO/SAT and press ?/1 while the system is turned on. Release ?/1 first, then release VIDEO/SAT. The system switches the function from “VIDEO” to “SAT” and vice versa.

Note

If the sound is distorted or too loud when “VIDEO” function is selected, switch to “SAT” function.

Tip

You can press FUNCTION +/– on the remote repeatedly to select “VIDEO” or “SAT”.

Components Optional
81GB