Sony MHC-WZ88D — SPEAKER SETUP, 54GB, Setting the speakers, xTRACK SELECTION (DVD VIDEO only), xDivX (Except for Latin American models)

xPAUSE MODE (DVD VIDEO and DVD-RW in VR (Video Recording) mode only)

Select the picture in pause mode.

AUTO	The picture, including subjects
	that move dynamically, is output
	with no jitter. Normally select this
	position.
FRAME	The picture, including subjects
	that do not move dynamically, is
	output in high resolution.

xTRACK SELECTION (DVD VIDEO only)

Gives priority to the sound track which contains the highest number of channels when you play back a DVD VIDEO on which multiple audio formats (PCM, DTS, MPEG audio, or Dolby Digital format) are recorded.

OFF	No priority given.
AUTO	Priority given.

Notes

•When you set “TRACK SELECTION” to “AUTO”, the language may change. The “TRACK SELECTION” setting has higher priority than the “AUDIO” settings in “LANGUAGE SETUP” (page 51). However, depending on the disc, this function cannot be performed.

•If PCM, DTS, Dolby Digital, and MPEG audio sound tracks have the same number of channels, the system selects PCM, DTS, Dolby Digital, and MPEG audio sound tracks in this order.

xMULTI-DISC RESUME (DVD VIDEO and VIDEO CD only)

Turns on and off the Multi-Disc Resume. The resume playback point can be stored in the system for up to 40 different DVD VIDEOs and VIDEO CDs (page 20).

ON	Stores the resume playback point
	in the system for up to 40 discs.
OFF	Does not store the resume
	playback point in the system.
	Playback starts at the resume
	playback point only for the current
	disc in the system.

xAUDIO DRC (Dynamic Range Compression) (DVD VIDEO and DVD-RW in VR mode only)

Narrows the dynamic range of the sound track. Useful for watching movies at low volume late at night.

OFF	No compression of dynamic
	range.
STANDARD	Reproduces the sound track with
	the kind of dynamic range that the
	recording engineer intended.
MAX	Narrows the dynamic range fully.

Note

AUDIO DRC can only be performed with Dolby Digital sources.

xDivX (Except for Latin American models)

Display the registration code for this system. For more information, go to http://www.divx.com on the Internet.

Setting the speakers

— SPEAKER SETUP

To obtain the best possible surround sound, set for the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the level of the speakers to the same level.

Select “SPEAKER SETUP” in the Setup menu. For details, see “Using the DVD setup menu” (page 50).

The default settings are underlined.

SPEAKER SETUP

SIZE:

DISTANCE:

LEVEL(FRONT):

LEVEL(SURROUND):

TEST TONE:		OFF
	FRONT:	YES
	CENTER:	YES
	SURROUND:	BEHIND
	SUBWOOFER:	YES

54GB