Getting Started

Hooking up the system

Do the following procedures 1to 7to hook up your system using the supplied cords and accessories.

AM loop antenna

To center

 

speaker

FM lead antenna

DVD player/Tuner Amplifier/Tape deck

5

To front speaker (right)

Started Getting

To surround speaker (right)

To surround speaker (left)

Preparation

Place the components as shown below.

Amplifier/

DVD player/

Tape deck

Tuner

To front speaker (left)

Note

The system control cables are used to send audio and electrical signals between the components for interlinked operation.

Be sure to insert the connector horizontally until it clicks into place. Otherwise the system will not operate correctly.

2Connect the speakers.

1Connect the system control cables from the DVD player/Tuner component to the appropriate (same numbered) SYSTEM CONTROL connectors on the Amplifier/Tape deck component.

Be sure to match the appropriate speaker cords from the speaker terminals to the corresponding SPEAKER terminals on the Amplifier/Tape deck component as shown below.

Amplifier/Tape deck

continued

9GB