Changing the lithium battery in the camera

When the lithium battery becomes weak or dead, the “I” indicator flashes on the LCD screen. In this case, replace the battery with a Sony CR2025 or Duracell DL-2025 lithium battery. Use of any other battery may present a risk of fire or explosion.

When installing the lithium battery, keep the battery pack attached. Otherwise, you will need to reset the date and time retained by the lithium battery.

1 Slide the lid of the lithium battery compartment down and open it.

2 Push the lithium battery once and push it out from the holder.

3 Install the lithium battery with the positive (+) side facing out.

4 Close the lid.

WARNING

The battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same type recommended by the manufacturer.

Discard used batteries according to the manufacturer’s instructions.

38-EN

Page 38
Image 38
Sony MVC-FD5 operating instructions Changing the lithium battery in the camera, 38-EN