
masterpage:Right
filename[D:\WORKS\Mavica\2nd\3066742111MVCFD92UC\02GB-
MVCFD92UC\04bas.fm]
B
BB
BPlayback
29
modelname1[MVC-F D92]
[3-066-742-11(1)]
xInstalling the USB driver
First,in stall the USB driver to the computer. The USB driver is contained together
withapplication software for viewing images on a CD-ROM which is supplied with
yourcam era.
Ifthe drive is not r ecognized properly, see “Troubleshooting” on page 77.
For Windows 98, Windows 98SE, Windows Me and Windows
2000 Professional users
Donot connect yourc amera to your computer before installing the
USBdriver.
1Makes ure that the camera is not connected to your computer.
Donot conn ect the USB cable in this step.
2Turnon your computer and allow Windows to load.
3Insertth e supplied CD-ROM in the CD-ROM drive of your computer.
Theapplication software screenappears.
4Click“USB Driver Installation for Windows 98/98SE, Windows Me,
Windows 2000”.
USBdriver installation starts.
5Followthe o n-screen messages to install the USB driver.
Ifthe message appears after the installation to verify that you restart the
computer,restart th e computer.
6Connect the USB jack (mini-B) on yourcam era with the USB
connector on yourc omputer using the supplied USB cable.
7Insert a floppy disk or a “Memory Stick”intoyour camera, and set
theMS/F D selector to the appropriate position according to the
mediainse rted.
8Connect the AC power adaptor and turn on your camera.
“USBMODE”appears on the LC D screen of your camera and the camera is set
tocommu nication standby mode. Your computer recognizes the camera, and
theWindows Add Hardware Wizardstarts.
Computer USB cable
To the U SB
connector To the USB
jack
Push the connector
as far as it will go
01cov.book Page29 Monday, December18, 2000 3:34PM