Sony MZ-R900DPC, MZ-R900PC, MZ-R900 labeling (Phrase Bank), labeling, Storing phrases, frequently used in, -GB, press, Notes, Notes, keep pressing, a track or disc, Do the procedure

2 seconds or m

“ Entry!” appears in the display and the cursor flashes after the phrase you just stored. You can then continue with labeling operation.

49-GB

Relabeling recordings

Follow the steps corresponding to the

Storing phrases while labeling

labeling method until the disc or track is

a track or disc

ready to be labeled. Enter a new character

over the one you want to change, then1 Do the procedure“ Labeling press the jog lever (L) on the recorder and

recordings” (page 46) to enter a

keep pressingx for 2 seconds or more on phrase.

the remote control.

2 After entering the phrase,X pressfor

Labeling a track or a disc during recording

•The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device.

1 Press DISPLAY for 2 seconds or more during recording.

2	. or	Storing phrases
	Turn the control towards	frequently used in
	towardsN>until“ EDIT” flashes
	in the display, and then press x.	labeling (Phrase Bank)
3	“ : Name” flashes in the display.	Phrases that you often use in track o
	To label a track, xpress.
		labeling can be stored in the’s recorde

To label a disc,memory. pressThere are two waystheto store con towards.or N>towardsphrases: storing a phrase while

until		performing the labeling procedure, or
“	: Name” flashes in the	storing a phase using the EDIT menu.
display, then press x.

The track or discApproximatelyis40 phrasesreadyof about 10 to

labeled.	characters each (with a total character
4 Follow steps 5 to“ Labeling7 of a	count of about 600) can be stored in the
	phrase bank. The actual number will
disc during stop” (page 48).	depend on the length of each phrases.
To cancel labeling, press DISPLAY for
2 seconds or more.	On the recorder
Notes	VOL +/–
• When the recording is stopped while labeling
		X
a track or a disc during recording, or when the

recording moves on to the next track while
labeling a track, the input at that point is
entered automatically.
• “ LP:” is automatically added at the beginning
of track names for tracks recorded in LP2 or
LP4 mode.	Jog lever (L)

Notes

• You cannot relabel premastered MDs or label MDs that have not been recorded.

• The recorder is able to display, but cannot label using Japanese“ Katakana” characters.