2Record an MD

 

 

REC

END SEARCH

x

1Press and slide REC to the right.

“ REC” lights up and recording starts.

2Play the CD or tape you want to record.To stop recording, press x.

After you pressx, the record automatically turn (when using batter (when using AC pow

To

Press

 

 

Record from the end of the previous END SEARCH, and then press and slide

1)

REC to the right.

 

 

recording

 

 

Record partway through the previous Press jog lever (R)N),(

or fli

1)

lever >(R)or.towardsfin

recording

 

start pointx ofto rest

 

Then press and sl

 

 

 

 

Pause

X2)

 

 

 

PressXagain to resu

Remove the MD x and open3)(Thethelidli while“ TOC Edit” flashing in the display.)

1)By setting “ REC-Posi” to “ From End” , recording operations will always start from the end of the previously recorded material (page 25).

2) A track mark is added at the point where you press X again to resume r the remainder of the track will be

3)If you open“ REC-Posi” istheset to “ FromlidHere” , recordingwhilewill begin with the first track the next time you record. Check the point to start recording on the display.

If the recording does not start•Make sure the recorder is not locked (page 55).•Make sure the MD is not record-protected (page 59).•Premastered MDs cannot be recorded over.For models supplied with the AC plug adaptorIf the AC power adaptor does not fit the wall outlet, use the AC plug adaptor.

Notes

•“ Data Save” or “ TOC Edit” flashes while data of the recording (the track’s start and end points, etc.) is being recorded. Do not move or jog the recorder or disconnect the power source while the indication is flashing in the display.

•The lid does not open until“ TOC Edit” disappears in the display.

•If the power supply is disrupted (i.e. the battery is removed or becomes exhausted or the AC power adaptor is disconnected) during

a recording or editing operation, or while

“TOC Edit” appears in the display, then it will not be possible to open the lid until power is restored.

17-GB