To start/stop recording in sync with the source player (Synchro-recording)

2

3

Press and slide REC to the right. The recorder stands by for recordPlay the source sound.The recorder starts recording wh receives the playing sound.
You can easily make digital recordings of
a digital source on an MD.

To stop recording, press x

Before synchro-recording, make

z

connections to the digital source with a

 

 

 

 

 

 

 

 

• You cannot pause manually during synchro-

digital cable, and insert a recordable MD.

 

 

 

 

 

 

 

 

recording.

 

 

 

 

 

 

 

 

• When there is no sound from the player for

 

CD players,

 

about 3 seconds during synchro-recording, th

 

 

recorder goes into the standby mode

 

etc.

 

automatically. When the sound comes from

 

 

 

 

 

 

 

 

the player again, the recorder resumes

 

 

 

 

 

 

 

 

synchro-recording. If the recorder is kept in

 

 

 

 

 

 

 

 

the standby mode for 5 minutes or longer, the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

recorder stops automatically.

 

 

 

 

 

 

 

 

• For longer recording; follow step 1 of

 

 

 

 

 

 

 

 

“ Recording for long times” (page 23) to select

 

 

 

 

 

 

 

 

the recording mode, and then start the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

procedure of synchro-recording.

REC

x

1 Slide SYNCHRO REC to ON.

End ¢¢7

Synchro-recording indication

“SYNC” appears in the display.

“SYNC” does not appear if optical cable is not connected to the recorder.

Notes

•Do not switch SYNCHRO REC while recording. Recording may not be done properly.

•Even when there is no recorded sound on the sound source, there may be cases when recording does not pause automatically during synchro-recording due to the noise level emitted from the sound source.

•If a silent portion is encountered for approximately 2 seconds during synchro- recording from a sound source other than a CD or an MD, a new track mark is automatically added at the point where the silent portion ends.

•Synchro-recording cannot be done if the connecting cord is not an optical cable, or if the cable is connected to the MIC (PLUG IN POWER) jack.

•You cannot manually change the recording level or the recording mode during synchro- recording.

24-GB