Notes on batteriesNote on digital recording

Incorrect battery usage may lead to leakageThis ofrecorder uses the Serial Copy battery fluid or bursting battery. To preventManagement System, which allows only fi

such accidents, observe the following

generation digital copies to be made from

precautions:

premastered software. You can only make

• Install the + and– poles of the batteries

copies from a home-recorded MD by using

correctly.

analog (line out) connections.

• Do not try to recharge dry battery.

Premastered software such as CDs or

•When the recorder is not to be used for a long MDs. time, be sure to remove the batteries.

•If a battery leak should develop, carefully and

thoroughly wipe away battery fluid from the battery compartment before inserting new ones.

Digital recordingNote on mechanical noise

The recorder gives off mechanical noise while operating, which is caused by the power-saving system of the recorder and it is not a problem.

To protect a recorded MDHome-

No

Recordable

recorded

digital

MD

 

To record-protect an MD, slide open the tab at MD

recording

 

the side of the MD. In this position, the MD

 

 

 

cannot be recorded. To record again, slide the

 

 

 

tab back so the tab is visible.

 

 

 

Tab
Microphone, record player, tuner, etc (with analog output jacks).Analog recording
Back of the MD

Recorded material is

protected.
Home-recorded MD

Digital recording

Recorded material is not protected.

Recordable

No

Recordable

MD

digital

MD

 

recording

 

59-GB