Sony MZ-R900DPC, MZ-R900PC, MZ-R900 Checking, position, the remaining, time or the recording

5 While observing the level meter in			the remaining
display, adjust the recording levelCheckingby
flipping the jog lever (L).		time or the recording
Set the level so that the input lights up
		position
around the fifth segment on the level
		You can check the remaining time, t
meter. If the maximum input lights up
		number, etc. when recording or duri
the ninth segment, lower the level.
		stop.
Volume	increases
decreases		On the recorder
<	,
REC	+	Jog lever (L)
fifth segment	ninth segment		REC indicator
Recording does not start in this step.
If your source is an externally
connected component, be sure to cue
the source to the beginning of the
material to be recorded before you
start playback.		1 While the recorder is recording or
		stopped, press the jog lever (L), fl
X again to startthe leverrecordinguntil“ DISPLAY” flashes .
6 Press		the display, and then press the lever
To stop recording, press x.
		again.
The recording level control is switched back to
automatic control when you record the next		2 Flip the jog lever (L) until the
time.		information you want flashes in t
z		display.

If youx duringpress	Each time you flip the lever, the
	recording operation, t

recorder will revertdisplaytochangesautomaticas follows. r

adjustment mode the next time you s
recording operation.
	LapTime (The elapsed time of the
Notes	current track.)
• The recording level cannot be adjusted while r
recording is in progress. If you want to adjustRecRemain (The remaining
the recording level after you have started the recordable time.)
recording, pressX to pause the recorder. Then
	r
do the procedure from step 5.
• You cannot adjust the recording level	AllRemain (The remaining time
	1)
manually during synchro-recording.	after the current track.)
	r
	Clock (Current time.)
	1)Appears only when the recorder is stopped.
	3 Press the jog lever (L).
	The display changes as follows.

28-GB