“ TOC Edit” disappears in the display.
• The lid does not open until“ TOC Edit” disappears in the display after editing. ∗ ΤΟΧ = Ταβλε οφ Χοντεντσ
Erasing tracks
Notes on editing
• Do not move or jog the recorder while“ TOC Edit” * is flashing in the display.
• You cannot edit tracks on an MD that is 3 record-protected. Before editing tracks, close the tab on the side of the MD (page 59).
• If you perform an editing operation while playing, be sure not to turn the power off until

Editing recorded tracks

You can edit your recordings by adding/2 Flip the jog lever (L) until

erasing track marks or labeling tracks and“ : Erase” flashes in the display, MDs. Premastered MDs cannot be editedand. then press the lever.

“ Erase OK?” and “ PushENTER” appear alternately in the display. To cancel erasing, press x.

Press the jog lever (L) again.

The track is erased and the next t starts to play. All the tracks after one erased are automatically renumbered.

To erase a part of a track

Add track marks at the beginning an end of the part you want to erase, th erase the part.

 

 

To erase the whole disc
To erase a track

 

You can quickly erase all the tracks and
Note that once a recording has beendata of the MD at the same time.

 

erased, you cannot retrieve it. Make sure Note that once a recording has been
of the track you are erasing.erased, you cannot retrieve it. Be sure to
check the contents of the disc you want to

 

 

Jog lever (L)

x

erase.

 

 

 

 

Jog lever (L)

 

 

x

1 While playing the track you want to
erase, press the jog lever (L), flip the

lever until“ EDIT” flashes in the

1

Play the disc you want to erase to

display, and then press the lever

 

check the contents, and thenx pres

again.

 

to stop.

“ : Name” flashes in the display, and the recorder plays the selected track repeatedly.

2 Press the jog lever (L), flip the lev until“ EDIT” flashes in the display,

and then press the lever again.

“ : Name” flashes in the display.

continued

43-GB