,Disconnect the audio source (pages 16, 22).
TroubleshootingShould any problem persist after you have made these checks, consult y dealer.Symptom Cause/Solution

The recorder does• Audio sources may not be securely connected. not work or works

poorly.

•The HOLD function is turned on (“ HOLD” appears in the display when you press an operation button on the recorder).

,Disable HOLD by sliding the direction of the arrow (pag

•Moisture has condensed inside the recorder.

,Take the MD out and leave t several hours until the moi

• The rechargeable battery or dry battery is weak (r or“ LOW BATT” flashes).

,Charge the rechargeable bat (page57).

•The rechargeable battery or dry battery have been inserted incorrectly.

,Insert the battery correctl

•You pressed a button while the disc indication was rotating quickly.

,Wait until the indication r

•When recording digitally from a portable CD player, you did not use AC power or did not disable the anti-skip function such as ESP (page 18).

•The analog recording was made using a connecting cord with an attenuator.

,Use a connecting cord witho

•The AC power adaptor was unplugged during recording or a power outage occurred.

•While operating, the recorder received a mechanical shock, too much static, abnormal power voltage caused by lightning, etc.

,Restart the operation as fo

1 Disconnect all the power sources.2 Leave the recorder for about 30 seconds.3 Connect the power source.

•The disc is damaged or does not contain proper recording or editing data.

,Reinsert the disc. If this

•The disc is record-protected (“ PROTECTED” appears).

,Slide the tab (page59).

•Recording level is too small to record (when recording manually).

,Pause the recorder and adju

61-GB