Sony MZ-R900DPC, MZ-R900PC, MZ-R900 mode, When, Notes, 37-GB, Preset, towards, –4±0 +3, when the, treble-setting, (Position: –2), seconds or more, the followings:, 4 Press RPT/ENT

2 During playback, press SOUND for 2
seconds or more.	To select a preset sound
	On the remote control, press SOUND

repeatedly to select“ SOUND1” or “ SOUND2”

The recorder changes to bass-setting

or nothing appears in the display.

mode. Pressing the SOUND button

On the recorder, press the jog lever (L), flip the

for 2 seconds again changes the lever until “ SOUND1” , “ SOUND2” , or recorder back to treble-setting mode.

“ SOUND OFF” flashes in the display, and then press the jog lever (L).

			Factory settings of the Digital Sound
When	you select bass-setting mode,		Preset
“B” appears. When you select treble-			Factory settings of the Digital Sound Preset are
setting mode, “T” appears.			the followings:
			• “ SOUND1” : bass +1, treble ±0
			• “ SOUND2” : bass +3, treble ±0
3 Turn the control on the remote control
			z
towards. or N>towards
			• The settings can be stored to the Personal Disc
repeatedly to adjust				the bass
treble.			Memory (page 38).
			• Settings can also be changed while playback
Example: While adjusting the bass			is momentarily pausedX)( .
		The cursor moves.	Notes
		(Position: –2)	• Settings cannot be changed through the
			operation buttons on the recorder.
			• Digital Sound Preset becomes inoperative
			when the“ AUDIO OUT” parameter for the
	–4 ±0 +3		i/LINEOUT “ LINEjackOUT” . Inis s
			this case, set the “ AUDIO OUT” to
			“ HeadPhone” (page 20).
Pressing the SOUND button for
			• Sound distortion may occur when you use
than 2 seconds toggles the dis
between“ SOUND1” and			Digital Sound Preset. In this case, lower the
			volume or change the settings.
“ SOUND2” . When you press
			• Changing to another Digital Sound Preset
SOUND for a short time while			during a recording operation will not affect
adjusting the bass or treble, the			the quality of recorded sound.
setting for that sound is entered and
the display switches to the other
sound setting.

The sound can be adjusted in 8 steps (– 4, – 3, ...±0, ...+2, +3).

4 Press RPT/ENT.The sound settings are saved and the playback display appears again.

37-GB