to MIC (PLUG IN POWER)
Stereo microphone
Recording without overwriting existing material
Recording from a microphone

Connect a stereo microphone to the

If you wish to avoid overwriting the (PLUG IN POWER) jack. For more current contents of an MD, do the information on stereo microphones, s following procedure. All new material“ Optional accessories” (page 68).

will then be recorded from the end of the current contents.

Jog lever (L)

Jog lever (L)

1 While the recorder is stopped, press REC the jog lever (L).

2 Flip the jog lever (L) repeatedly until

“ REC-Posi” flashes in the display, and then press the lever.

3 Flip the jog lever (L) repeatedly until

“ From End” flashes in the display,

1

Press and slide REC to the right.

 

For other operations,“ Recordingsee

and then press the lever.

 

 

an MD right away!” (page 16).

 

 

To start recording from the

To stop recording, press x

current point

Select“ From Here” in step 3.

To select microphone sensitivity

Notes

1

Press the jog lever (L) while the recorder is

 

stopped.

• The setting will remain even after the power is

 

2

Flip the jog lever (L) repeatedly until“ MIC

turned off.

 

SENS” appears in the display, and then

• If you start recording while the recorder is in

 

 

press the lever (L).

play-pause mode, the recording will begin

 

3

Flip the jog lever (L) repeatedly until

from the point at which it is paused.

 

“ SENS HIGH” or “ SENS LOW” appears

 

 

 

 

in the display.

 

 

When recording a soft or a sound in the

 

 

distance, set to “ SENS HIGH” . When

 

 

recording a loud or a sound at close range,

 

 

set to “ SENS LOW” .

 

4

Press the jog lever (L).

25-GB