MessagesIf the following error messages flash in the display window, check the ch
Error messageMeaning/Remedy

 

BLANKDISC

• An MD with no recording on it is inserted.

 

 

 

DISC ERR

• The disc is damaged or does not contain proper recording or

 

editing data.

 

,Reinsert the disc. If this

 

 

DISC FULL• There is no more space to record on the disc.

 

,Replace the disc.

 

 

Data Save• The MD player is recording information (sounds) from the

 

memory to the disc.

 

,Wait until this process is

 

to any physical shock, nor

 

 

TOC Edit• The MD player is recording information (track start and end

 

position) from the memory to the disk.

 

,Wait until this process is

 

to physical shock, nor disr

 

 

 

BUSY

• You tried to operate the recorder while it was accessing the

 

recorded data.

 

,Wait until the message goes

 

minutes).

NAME FULL• You tried to enter more than 200 letters to label a single track or disc.

•You tried to enter a total of more than 1700 letters for track or disc names.

,Enter the characters within

Hi DC in• Voltage of the power supply is too high (The supplied AC power adaptor or the recommended car battery cord is not used).

,Use the supplied AC power a battery cord.

HOLD

• The recorder is locked.

 

,Slide HOLD against the arro

 

(page55).

LOW BATT• Batteries are weak.

,Charge the rechargeable bat (page57).

MEM OVER• You tried to record with the recorder placed where it receives continuous vibration.

, Put the recorder on a stab

65-GB