By connecting the recorder to a Sony portable CD player that supports Join Text (the CD text copying function) ( E990, etc.), you can copy track and d names automatically during recordin addition to the CD text connecting ca (RK-TXT1), make sure to connect the recorder to the portable CD player wi optical cable.
To display the current time
If you make a mistake while setting the clock
Copying CD text

Pressx, and set theinformationclock whileagain fro

2.You can skip recordinga step(JointbyText)press lever (L).

CD text connecting cable, CD that support CD-TEXT, When the recorder is not operating orand CD player that support

while recording, press the jog lever (L),Joint Text required flip the lever until“ DISPLAY” appears in

the display, and then press the lever again. Flip the jog lever (L) until “ CLOCK” flashes in the display, and then press the lever again. The current time appears in the display.

To display the time in the 24- hour systemWhile setting the clock,X.pressTo

display the time in the 12-hour

Jog lever (L)

pressXagain.

REC

To maintain the correct time

x

Once you set the clock, it will keep correct time

 

as long as the recorder is connected to a power

 

source, such as the rechargeable battery,

To LINE IN

alkaline dry battery, or AC power adaptor.

(OPT) jack

However, if no power source is connected, the

 

clock setting will change back to the factory

 

setting after about 3 minutes.

 

When changing the rechargeable battery or

To i/LINE OUT

alkaline dry battery, make sure to do it within 3

jack

minutes.

 

Note

RK-TXT1

Make sure the time is correctly set if you want the time stamp to be accurately recorded for an important recording.

To i/REMOTE jack

Portable CD player (D-E990, etc.)

POC-5B etc.

To LINE OUT (OPTICAL) jack

31-GB