This recorder comes with ferrite cores for connection to the supplied remote, the optional stereo microphone and the optional line cable. (You must attach the ferrite cores to comply with the applicable EMC standards.) Be sure to connect them when using the recorder with a computer. If not, there is no need to connect them.
1Open the ferrite core.
For the European, Asian and Chilean models:
For the
For the
•For the optional line cable: Pass the cord through the ferrite core/ Approx. 1 cm (0.6 in.) from the plug
For the
•For the optional line cable: Pass the cord through the ferrite core/ Approx. 1 cm (0.6 in.) from the plug
Refer to step 2 for the distance from the plug connected to the recorder.
3Close the ferrite core. Make sure the clasps are fully engaged.
2Wind the cord around the ferrite cores as follows.
For the European, Asian and Chilean models:
•For the supplied remote control: Wind the cord around the ferrite core once/ Approx. 4 cm (1.6 in.) from the plug
•For the optional stereo microphone: Wind the cord around the ferrite core twice/ Approx. 1 cm (0.6 in.) from the plug
•For the optional line cable: Wind the cord around the ferrite core once/ Approx. 1 cm (0.6 in.) from the plug
For the
•For the optional stereo microphone: Wind the cord around the ferrite core twice/ Approx. 1 cm (0.6 in.) from the plug
1Remove the clip.
2Attach the clip in the opposite direction.
10