Symptom | Case and/or corrective action |
The recorder does not work or | The rechargeable battery is not charged. Charge the rechargeable |
works poorly. | battery. |
| The volume is low. Turn up the volume. |
| No disc is inserted. Insert a recorded disc. |
| The HOLD function is turned on. Disable HOLD by sliding the |
| HOLD switch to the opposite direction of the arrow (page 15). |
| The lid is not firmly closed. Close the lid until it clicks. |
| Moisture has condensed inside the recorder if the recorder is |
| brought directly from a cold to a warm location. Take the disc out |
| and leave the recorder in a warm place for several hours until the |
| moisture evaporates (page 78). |
| The AC power adaptor, the AC power cord, or the USB cable is |
| not firmly connected. Connect them firmly. |
| The rechargeable battery is weak (“LOW BATTERY” flashes or |
| nothing appears). Charge the rechargeable battery (page 14) or |
| connect the recorder to a wall outlet. |
| The disc is damaged or does not contain proper recording or |
| editing data. Reinsert the disc. Rerecord the disc. If the error |
| message still appears, replace it with another disc. |
| There is a |
| recorder received a mechanical shock, too much static, abnormal |
| power voltage caused by lightning, etc. Disconnect all the power |
| sources and the USB cable. Leave the recorder for about 30 |
| seconds and connect the power source. |
|
|
The display does not turn on. | You tried to operate the recorder with the remote while “EL Light” |
| is set to “Auto Off” (page 59). Use the buttons and controls on |
| the recorder. |
The operation mode of the blank
When using a blank
70