Message | Case and/or corrective action |
|
|
CANNOT SET | You selected “REC Mode” or “Group REC” in the recorder menu or |
| “SpeedCtrl” in the remote menu while recording or in recording pause. |
| You selected “Time Mark” in the menu during digital recording or in |
| |
| You selected “REC Level” in the menu while the recorder is paused during |
| |
| You selected “REC Level” while the recorder is not stopped or in |
| |
| You selected “MIC AGC” while “REC Level” in the menu has been set to |
| “Manual”. |
|
|
CHARGE | You tried to charge the rechargeable battery at a place with a temperature |
outside the specified range for the recorder. Charge the battery at a | |
| temperature of +5° C (+41° F) to +35° C (+95° F). |
|
|
DATA SAVE | The recorder is writing information to the system file, such as the recorded |
| data or editing information. Wait until this process is completed. (Do not |
| expose the recorder to physical shock, nor disrupt power supply.) |
|
|
DC IN TOO HIGH | Voltage of the power supply is too high (The supplied AC power adaptor or |
| the AC power cord is not used). Use the supplied AC power adaptor or the |
| AC power cord. |
|
|
DISC FULL | You tried to record on a disc that does not have enough space. |
END | The recorder reached to the end of the last track in the selected play mode |
| while playing or moving the jog lever toward FF (on the remote). You |
| pressed the jog lever (/ENT) (/ENT on the remote) at the end of the |
| last track on the disc. |
|
|
ERROR | There is a |
| received a mechanical shock, too much static, abnormal power voltage |
| caused by lightning, etc. Disconnect all the power sources and the USB |
| cable. Leave the recorder for about 30 seconds and connect the power |
| source. |
FORMAT ERROR DISC
A disc with a format that the recorder does not support was inserted. Insert a standard MD or a disc used in
A disc formatted on the computer without using the SonicStage software was inserted. When formatting a disc on the computer, make sure to use the SonicStage software.
HOLD
IN MENU
The recorder is locked. Slide HOLD against the arrow to unlock the recorder (page 15).
You operated the remote while selecting a menu on the recorder. Do the setting on the recorder. You operated the recorder while selecting a menu on the remote. Do the setting on the remote.
72