Message

Case and/or corrective action

 

 

LINE OUT

You tried to change the volume while “Audio Out” in the menu has been set

NO VOL OPERATION

to “Line Out”. Set “Audio Out” to “Headphone” (page 59).

LOW BATTERY

The rechargeable battery is weak. Charge the rechargeable battery (page

 

14).

 

 

MEMORY OVER

You tried to record with the recorder placed where it receives continuous

 

vibration. Put the recorder on a stable place, and start recording again.

 

 

NO

You selected bookmark play without setting bookmarks. Set bookmarks

BookmarkedTRACK

(page 43).

NO DIGITAL COPY

You tried to make a copy from a disc that is protected by the Serial Copy

 

Management System. Make analog recording (page 38).

NO DISC

You tried to play or record with no disc in the recorder. Insert a disc.

NO GROUP

You selected “Group Erase” or “Group Move” in the menu on the recorder,

 

or “Title” – “Group” in the menu on the remote while using a disc with no

 

groups.

 

 

NO INPUT SIGNAL

The recorder could not detect digital input signals. Make sure that the

 

source is connected firmly (page 37). If you are making an analog

 

recording, ignore the message.

 

 

NON GROUPED TRACK

You selected “Group Erase” or “Group Move” in the menu on the recorder,

 

or “Title” – “Group” in the menu on the remote while selecting a track that

 

does not belong to a group.

 

 

NO TRACK

You tried to play a disc used in Hi-MD mode with no recorded tracks.

P/B ONLY DISC

You tried to record or edit on a premastered disc (P/B stands for

 

“playback”). Insert a recordable disc.

 

 

PC--MD

You operated the recorder or the remote while the recorder is connected to

 

the computer. Disconnect the recorder from the computer (page 22).

PLAY MODE

You operated the recorder while selecting the playback mode on the

 

remote.

 

 

PROTECTED DISC

You tried to record or edit on a disc with the tab in the record-protect

 

position. Slide the tab back (page 76).

PUSH STOP BUTTON

You tried to open the lid while the recorder was storing disc information

 

with the recorder connected to a computer. Wait until “SystemFILE

 

WRITING” has disappeared from the display after pressing · CANCEL.

 

 

READ ERROR

The recorder cannot read the disc information correctly. Reinsert the disc.

REC ERROR

Recording was not correctly done. Place the recorder at a place with no

 

vibrations and record again.

 

The disc is soiled with an oil film or finger prints, is scratched, or is not a

 

standard disc. Try recording again with another disc.

 

 

Troubleshooting

73