Combining tracks

(Combine)

You can erase a track mark to combine the tracks before and after the track mark.

This function can be set on the recorder only.

Note

You cannot combine tracks if:

•one of the two tracks or the both tracks have been transferred from the computer.

•one of the two tracks or the both tracks have been recorded in Hi-MD mode using the MD Simple Burner software.

•the tracks are recorded in different recording mode.

1While playing the track with the track mark you want to erase, press to pause.

2Find the track mark by moving the jog lever toward FR slightly.

For example, to erase the third track mark, find the beginning of the third track. “00:00” appears in the display. “MARK” appears in the display for a few seconds.

3Press T MARK to erase the mark.

“MARK OFF” appears in the display. The track mark is erased and the two tracks are combined.

When a track mark is erased when you combine two tracks, the title and the recording date of the second track changes to those of the first track.

Notes

•When you erase a track mark between the two consecutive tracks that are assigned into different groups, the second track is re-assigned into the group containing the first track. In addition, if you combine a track that is assigned to a group with a track that is not assigned to a group (two consecutive tracks), the second track takes the same registration setting as the first track.

•It is recommended that you use the recorder to combine long tracks recorded in LinearPCM. Transferring such tracks and combining them on the computer may require extremely long time.

48