Symptom

Case and/or corrective action

The rechargeable battery cannot be charged sufficiently through USB bus power.

If you operate the recorder while it is connected to a computer, it takes time for the rechargeable battery to be sufficiently charged by USB bus power. For faster charging, do not operate the recorder.

The installation was not

You are using an OS that does not support this software (page

successful.

19).

 

All windows applications are not closed. If you start the

 

installation while other programs are running, a malfunction

 

may occur. This is especially true for programs that require large

 

amounts of system resources, such as virus-check software.

 

There is not enough hard disk space on your hard disk. You need

 

200 MB or more free space on your hard disk.

 

 

The installation appears to have

Check for the appearance of an error message beneath the

stopped before it has completed.

installation window. Press the [Alt] key or [Tab] key to display

 

any message that has appeared, and then follow the displayed

 

instructions. If there is no message, the installation is still in

 

progress. Wait a little while longer.

The progress bar on the display is not moving or the access lamp has not lit for a few minutes during the installation.

The installation is progressing normally. Please wait. The installation may take 30 minutes or more, depending on your CD drive or system environment.

You cannot record audio data when you press and slide the REC switch while using the MD Simple Burner software.

The recorder is not correctly connected to the computer. Connect the recorder and your computer correctly using the USB cable.

Audio CD is not inserted in CD drive of the computer. Insert Audio CD.

The capacity of the disc is insufficient. Insert another disc.

Even though the recorder is recognized by the computer, it does not operate normally.

A USB hub is used. Connect the USB cable directly to the USB port of the computer.

You are using the recorder at a place with vibration. Use the recorder at a place with no vibration.

The recorder cannot be used as a

The SonicStage or MD Simple Burner software is active. Close

storage device.

the SonicStage or MD Simple Burner software.

 

 

The playing time of a transferred

This is due to a calculation discrepancy between the recorder and

track is different from the time

the computer.

that appears on your computer

 

monitor.

 

64