Connecting the recorder to your computer
Connect the recorder to your computer as follows.
Note
When using Windows ME or Windows 98SE
•If you connect the recorder to the computer with the disc mode on the recorder set to
•When you disconnect the USB cable, the message “Unsafe Removal of Device” appears in the computer display. This is not a problem. Merely click “OK” to make the message disappear.
Power (bus power) is supplied from the USB port of the computer so that the recorder can be used without power being supplied from the battery.
Computer
USB cable
To the USB cable connecting jack
To the USB port
1Insert a disc into the recorder.2Make sure the recorder is stopped and HOLD is released.3Connect the recorder to the computer through the USB cable.4Check the connections.If all connections have been correctly made, the display window appears as follows.
21