5Confirm that the operation lamp is off (), and then press and slide REC on the recorder ().
The operation lamp lights up in red and recording starts.
If you insert a previously recorded disc, the recording starts after the existing contents.
The operation lamp
REC
Basic recording operations
To | Press |
|
|
Stop | Press · CANCEL. (The operation lamp disappears.) |
|
|
Pause | Press *. (The operation lamp flashes in red.) Press again to resume |
| recording. |
|
|
Remove the disc | Press · CANCEL and open the lid. (The lid does not open until |
| “SystemFILE WRITING” disappears from the display and the operation |
| lamp stops flashing.) |
|
|
Adding track marks | Press T MARK. (The operation lamp disappears for a moment.) |
|
|
*A track mark is added at the point where you press again to resume recording while pausing; thus the remainder of the track will be counted as a new track.
disc a on Recording
33