Message | Case and/or corrective action |
|
|
RECONNECT USB | You tried to operate the recorder or the computer before the recorder was |
| recognized by the computer. Reconnect the USB cable. |
|
|
REHEARSAL | You tried to operate on the remote while performing the Divide Rehearsal |
| function (page 47). Do the setting on the recorder. |
SORTING | The recorder is sorting information after you selected “Artist” or “Album” |
| in the play mode. |
|
|
SOUND | You operated the recorder while setting the Sound function (page 45) on |
| the remote. Do the setting on the remote. |
|
|
STANDBY | This message appears when the recorder, while connected to the |
| computer, has written data to the disc once and is ready to write data again |
| immediately. If you try to write data to the disc while “STANDBY” is not |
| displayed, it may take a little time for writing to begin. |
|
|
SystemFILE | The recorder is storing information (track start and end position) from the |
WRITING | memory to the disc (page 80). Wait until this process is completed. |
TEMP OVER REC STOP | Heat has built up in the recorder. Let the recorder cool down. |
TitleFULL | You tried to enter characters that exceeds the maximum number |
| (approximately 200 characters) for a title. |
| You tried to enter characters that exceeds the maximum number |
| (approximately 55,000 characters in |
| MD mode) for a disc. |
|
|
TOC DATA ERROR | The recorder cannot read the disc information correctly. Insert another disc. |
TRACK FROM PC NO | You tried to combine or divide tracks that were transferred from the |
EDIT | computer or recorded in |
| software. |
|
|
TRACK FROM PC NO | You tried to record in the middle of a protected track that has been |
REC | transferred from the computer or you tried to record in the middle of a track |
| that was recorded in |
|
|
TRACK FULL | You tried to record more than 2,047 (on a disc used in |
| (on a disc used in MD mode) tracks. Erase unnecessary tracks (page |
| 54). |
74