Sony PDW-F70 When a disc is inserted, During front panel operations

When a disc is inserted

Alarm message in time	Alarm message in monitor video	Description/action
data display section	section
Unknown FS!	UNKNOWN FILE SYSTEM.	Format the disc, or eject it (see page 41).
	PLEASE FORMAT DISC OR EJECT.
No FS!	NO FILE SYSTEM.PLEASE EJECT DISC.	Eject the disc.
ILL. Disc!	IRREGULAR DISC IS USED.	Use a Professional Disc.
	USE PROFESSIONAL DISC.
Salvage NG!	CLIP SALVAGE WAS NOT COMPLETED.	See “Handling of Discs When Recording Does Not
		End Normally (Salvage Functions)” (page 41).
525/60 Clip a)	IRREGULAR DISC IS USED. DVCAM	Use another disc.
	525/60 CLIP(S) EXIST.
625/50 Clip a)	IRREGULAR DISC IS USED. DVCAM
	625/50 CLIP(S) EXIST.
4CHx16 Clip a)	DISC HAS 4CHx16 BIT CLIP(S).	Change the setting of AUDIO CONTROL >REC
	CHANGE RECORD FORMAT IN SETUP	MODE in the setup menu (see page 93).
	MENU.
2CHx16 Clip a)	DISC HAS 2CHx16 BIT CLIP(S).	Change the setting of AUDIO CONTROL >REC
	CHANGE RECORD FORMAT IN SETUP	MODE in the setup menu (see page 93).
	MENU.
No Support!	FORMAT NOT SUPPORTED.	A disc in an unsupported recording format is loaded.
	RECORDING AND PLAYBACK IS NOT	Use a disc formatted in the MPEG HD or DVCAM
	POSSIBLE.	format.
ILL. Index!	INDEX FILE ERROR.	Format the disc, or eject it (see page 41).
	PLEASE FORMAT DISC OR EJECT.
FORMAT NG!	AUTO FORMATTING WAS NOT	Eject the disc and insert it again, or insert another
	COMPLETED.	disc.
DI read err	CANNOT READ DISC
	INFORMATION.PLEASE EJECT DISC.
Read err
DRV ADJ err	CANNOT PERFORM AUTO DRIVE
	ADJUSTMENT.

a)Displayed only when DISPLAY CONTROL >ALARM is set to “ON” or “LIMITED”.

During front panel operations

Appendix	KEY INHI.! a)	KEY INHIBIT MODE IS SELECTED.	This appears when the KEY INH (SHIFT + DISPLAY)
	Alarm message in time	Alarm message in monitor video	Description/action
	data display section	section
			button is on.
			Turn the KEY INH button off.
	REMOTE! a)	REMOTE MODE IS SELECTED.	Set the remote control switch to “LOCAL”.
		SET REMOTE/LOCAL/NETWORK
		SWITCH TO LOCAL.
	No Disc! a)	NO DISC.	Insert a disc and try again.
	REC INHI.!	THE DISC WRITE PROTECT TAB IS SET	Set the disc’s Write Inhibit tab to enable recording
		TO SAVE.	(see page 40).
		REC INHIBIT MODE IS SELECTED.	This appears when REC INH on page P1 of the
			function menu is set to “ON”.
			Set REC INH to “OFF” (see page 82).
	No Clip! b)	NO CLIP.	This appears when a playback, search or delete
			operation is attempted on a disc with no clips
			recorded on it.
			Insert a disc with clips recorded on it.

108 Troubleshooting