Menus 6 Chapter

With this done, when you press the MENU button and the ,/OUT button to display the setup menu, all basic and enhanced items on menu level 1 appear.

SETUP MENU

OPERATIONAL FUNCTION

DISPLAY CONTROL

TIME CODE

DISC PROTECTION

VIDEO CONTROL

AUDIO CONTROL

INTERFACE SELECT

METADATA

SETUP BANK OPERATION

 

 

 

 

MENU GRADE

ENHAN

 

 

 

 

 

 

 

setting

 

Current

Changing the settings of enhanced items

To change the settings of enhanced items, first carry out the procedure in the previous section “Displaying enhanced items” then proceed as follows.

1 In the setup menu screen, repeat steps 2 to 7 of “Changing the Settings of Basic Items”, and then use the </IN, ,/OUT, M/MARK1, m/MARK2 buttons to select a menu item and change the setting.

2 When you have completed the settings, press the SET button.

The message “NOW SAVING...” appears in the monitor video section, and “Saving...” appears in the time data display section, while the new settings are saved in memory.

When the saving operation is completed, the monitor video section and time data display section return to their normal indications.

Returning menu settings to their factory default settings

After making menu setting changes, to return settings to their factory default settings (setting initialization), use the following procedure.

To return a particular setting to its factory default setting

In the section “Changing the settings of basic items” (page 96), carry out the procedure up to step 5, then with the current setting displayed (in the example, if the factory default setting has been changed, the current setting will be TC MODE), proceed as follows.

1 Press the RESET button.

“OFF” (factory default setting) is selected.

2 Press the SET button.

The setting returned to its factory default is saved in memory as the current setting.

To return all settings to their factory default settings

1 Display the setup menu.

2 Press the RESET button.

A message appears, to confirm whether or not you wish to return all settings to their factory default settings.

Message in the monitor

Initialize all items to factory

video section

preset values?

Message in the time

Init setup?

data display

 

 

 

3 Press the SET button.

The message “NOW SAVING...” appears in the monitor video section, and “Saving...” appears in the time data display, while the settings of all items are returned to their factory default settings. These factory default settings are saved in memory.

Note

If you power off the unit while settings are being saved, settings may not be correctly returned to their factory default settings. Wait until the saving is completed before powering off the unit.

To abandon the resetting operation

Instead of pressing the SET button, press the RESET button.

The display returns to the top level of setup menu, leaving the settings unchanged.

Disc Menu

Use the disc menu to delete data on discs and to format discs.

For the method of displaying the disc menu, see “Displaying the Setup and Disc Menus” (page 83).

98 System Menu