Selection Scene 4 Chapter

8 Use the arrow buttons or jog dial to select the desired clip.

You can also select clips with the following operations.

Press the PREV or NEXT button: Moves to the previous or next clip.

Press the PREV or NEXT button with the SHIFT button held down: Moves to the first or last clip.

Press the M/MARK1 or m/MARK2 button with the SHIFT button held down: Switches to the previous or next page. Does not switch when there is only one page.

Press the </IN button or ,/OUT button with the SHIFT button held down: Selects continuous multiple clips.

To display the total duration of the current clip list after the addition of the selected clips

When you press the SHIFT button, the total duration of the selected clips is displayed, along with the total duration of the clip list after the addition of the selected clips. This allows you to check the new total duration before making the addition.

9 Press the SET button.

An I-shaped cursor appears in the lower part of the scene selection window.

Press the RESET button to return to the state of step 8.

10Use the arrow buttons or jog dial to move the I-shaped cursor to the desired position.

You can also move the I-shaped cursor with the following operations.

Press the PREV or NEXT button: Moves the cursor to the previous or next sub clip.

Press the PREV or NEXT button with the SHIFT button held down: Moves the cursor to the first or last sub clip.

Press M/MARK1 or m/MARK2 button: Moves to the 4th previous or 4th next sub clip.

11With the SHIFT button held down, press the SET button.

All the clips selected in step 8 are added to the current clip list as sub clips and the scene selection window shows thumbnails of registered sub clips.

At the same time, the cursor disappears and you can select a new clip.

Total duration of sub clips in the current clip list

Cursor (shows insertion position of next sub clip)

Thumbnails of the sub clips already added to the current clip list

12Repeat steps 8 to 11 until you have added all of the desired clips to the current clip list.

You can add the same clip as a sub clip any number of times.

13When you have finished selecting all the clips you want, press the SET button without pressing the SHIFT button.

This closes the scene selection window, and the screen returns to the CLIP menu.

To close the CLIP menu

Press the RESET button.

14Save the current clip list to disc.

See “Saving the Current Clip List to Disc” (page 70).

Notes

•Unless the current clip list has been saved to disc, its contents will be lost when the unit is powered off or the disc is ejected. After creating a clip list, be sure to save it. An asterisk (*) appears after the date and time of creation when a clip list has not been saved to disc.

64 Creating Clip Lists