Sony PDW-F70 manual 36

The values of “24F TC” and “30F TC” under TIME CODE >PD PRESET in the setup menu are used as the conversion references.

To display 30-frame pulldown timecode in the monitor video display section or on an external monitor

	1	Press the MENU button.
	2	The system menu (see page 83) appears.
2Chapter		Press the M/MARK1 or m/MARK2 button to select
Preparations		SETUP MENU.
	3	Press the ,/OUT button.
		The setup menu appears.
	4	Press the M/MARK1 or m/MARK2 button to select
		“DISPLAY CONTROL”.

SETUP MENU

OPERATIONAL FUNCTION

DISPLAY CONTROL

SETUP BANK OPERATION

MENU GRADE :BASIC

5 Press the ,/OUT button.

The second level of the DISPLAY CONTROL menu appears.

6 Press the M/MARK1 or m/MARK2 button to select “DISPLAY INFO”.

SETUP MENU
DISPLAY CONTROL
CHARA.DISPLAY	:ON
CHARA.POSITION
CHARA.TYPE	:WHITE
CHARA.VSIZE	:x1
DISPLAY INFO	:T&STA
SUB STATUS	:OFF
MENU DISPLAY	:WHITE
BRIGHTNESS	:55%
ALARM	:ON

7 Press the ,/OUT button.

The third level of the menu appears.

SETUP MENU
DISPLAY CONTROL
DISPLAY INFO	:T&STA
* TIME DATA & STATUS
TIME DATA & UB
TIME DATA & CNT
TIME DATA & TIME
TIME DATA & CLIP
TIME DATA ONLY

8 Press the M/MARK1 or m/MARK2 button to select “TIME DATA ONLY”.

9 Press the SET button.

The setting is confirmed.

10Turn the display of character information on.

For details, see “To turn superimposed text on and off” (page 37).

As shown below, you can display 24-frame timecode at the same time as 30-frame pulldown timecode.

L	T	C	0	0	:	5	9	:	5	9	:	2	3
P	D	T	0	0	:	5	9	.	5	9	:	2	8

36 24P (23.98P) Mode Settings