Sony PDW-F70 Input and Output Signals in 24P (23.98P) Mode, Input and output signals

SETUP MENU

OPERATIONAL FUNCTION SYSTEM SEL

SYSTEM FREQ : 601 * 60I

50I

30P

25P

23.98P

2Chapter	14Press the m/MARK2 button to select “23.98P”.
Preparations	15If you want to change the monitor output setting as
	well, press the </IN button to return to the higher
	level screen (the state of step 11). If you do not want
	to change the monitor output setting, proceed to step
	19.
	16Press the m/MARK2 button to select “23.9P
	OUTPUT”.
	17Press the ,/OUT button.
	The setting value appears.

SETUP MENU

OPERATIONAL FUNCTION SYSTEM SEL

23.9P OUTPUT: PsF

*23.98PsF

2-3 PULL DOWN

18Press the M/MARK1 or m/MARK2 button to select one of the following.

23.98PsF: Output as 23.98P.

2-3 PULL DOWN: Output after pulldown conversion to 59.94i.

19Press the SET button.

A confirmation message appears.

20Press the SET button to confirm the changes, or the RESET button to cancel them.

If you have pressed the SET button, power the unit off and on again to enable the changes.

Input and Output Signals in 24P (23.98P) Mode

The following tables show the signals input and output by the unit when “23.98PsF” and “2-3 PULL DOWN” are selected.

Input and output signals

I/O	Type	23.98PsF	2-3 PULL
			DOWN
Input	Reference	23.98PsF	59.94i
signals	video input	reference signal	reference signal
	HDSDI input	23.98PsF video and audio
		signals
Input	LTC input	24-frame timecode
timecode
	HDSDI LTC
	input
Output	HDSDI	23.98PsF video	Video and
signals	output	and audio	audio signals
		signals	pulled down to
			59.94i
	SDSDI output	No output
	Composite
	output
	i.LINK DV
	output
	i.LINK TS
	output
Timecode	LTC output	24-frame	30-frame
output		timecode	timecode after
	HDSDI LTC/
			pulldown
	VITC output
			conversion
	SDSDI	–
	RP188 LTC
	output
	SDSDI VITC	–
	output
	COMPOSITE	–
	VITC output

34 24P (23.98P) Mode Settings