SETUP MENU

 

DISPLAY CONTROL

 

CHARA.DISPLAY

:ON

CHARA.POSITION

 

CHARA.TYPE

:WHITE

CHARA.VSIZE

:x1

DISPLAY INFO

:T&STA

 

 

SUB STATUS

:OFF

MENU DISPLAY

:WHITE

BRIGHTNESS

:55%

ALARM

:ON

 

 

4 Press the ,/OUT button.

This displays all possible settings for the item selected in step 3.

 

SETUP MENU

 

DISPLAY CONTROL

 

SUB

STATUS

:OFF

 

 

 

*

OFF

 

 

TC MODE

 

 

REMAIN

 

 

CLIP NAME

 

 

 

 

5 Press the M/MARK1 or m/MARK2 button to change the setting of the item.

 

SETUP MENU

 

DISPLAY CONTROL

 

SUB

STATUS

:OFF

*

OFF

 

 

 

 

 

TC MODE

 

 

 

 

REMAIN

CLIP NAME

6 To change other settings, press the </IN button to return to the previous screen, then repeat steps 3 to 5 as required.

7 When you have completed the settings, press the SET button.

The message “NOW SAVING...” appears in the monitor video section, and “Saving...” appears in the time data display section, while the new settings are saved in memory.

When the saving operation is completed, the monitor video section and time data display section return to their normal indications.

Notes

•If you power off the unit before a save operation is completed, settings may be lost. Wait until the save is completed before powering off the unit.

•If, instead of pressing the SET button, you press the MENU button, the new settings are not saved. The message “ABORT !” appears in the monitor video section and “Abort !” in the time data display section for about 0.5 second, and the system exits the menus. To change more than one setting, be sure to press the SET button after making the settings.

Meanings of indications on the menu screen

On-screen indication

Meaning

Right-pointing arrow (c) at

Pressing the ,/OUT button

the right of a menu item

switches to the next lower

See step 1 of the foregoing

menu level or to a setting

operating procedure (see

selection screen.

page 96).

 

 

 

Left-pointing arrow (C) at

Pressing the </IN button

the left of a menu item

returns to the previous (higher)

See step 2 of the foregoing

menu level.

operating procedure (see

 

page 96).

 

 

 

Character string at the

Current setting of the menu

right of a menu item

item

 

When shown with a colon (:):

 

the current setting is the

 

same as the factory default

 

setting.

 

See step 2 of the foregoing

 

operating procedure (see

 

page 96).

 

When shown with a raised

 

dot (•): the current setting

 

is different from the factory

 

default setting.

 

See the next item,

 

“Displaying enhanced

 

items”.

An * (asterisk) in a

Factory default setting

complete list of settings

 

See step 4 of the foregoing

 

operating procedure (see

 

page 97).

 

Displaying enhanced items

The factory default setting is not to display enhanced items.

To display enhanced items, set the menu item MENU GRADE to “ENHANCED”, following the procedure in the previous section “Changing the settings of basic items”. In step 1, first select “MENU GRADE”, and next select “ENHANCED”, then press the SET button to save the setting in memory.

Menus 6 Chapter

System Menu 97