Sony PDW-F70 Setup Menu Operations, Buttons used to change settings, Changing the settings of basic items

MENU GRADE [Menu grade]: Selection of menu items to	Description
be displayed
Determine whether to display basic items only or both basic	*BASIC [>> Basic]: Display basic items only.
and enhanced items in the monitor video section and the time	ENHANCED [>> Enhanced]: Display both basic and
data display section when using the setup menu.	enhanced items.

Menus 6 Chapter

Setup Menu Operations

This section explains how to change menu settings.

Buttons used to change settings

Use the following buttons to change menu settings.

Menu control buttons	Functions
MENU button	•	Display and hide the menu.
	•	Return to the menu from
		setting screens.
M/MARK1 and m/MARK2	These buttons move the
buttons	highlighted cursor up and down
	within the current level to select
	an item or setting. Hold down
	one of these buttons to make
	the highlighted cursor move
	continuously.
</IN and ,/OUT buttons	Press the ,/OUT button to go
	down one level.
	Press the </IN button to go
	up one level.
	Hold down one of these
	buttons to make the highlighted
	cursor move continuously.
RESET button	•	Returns the setting to the
		factory default setting.
	•	Answer “No” to the question.
SET button	•	Saves the new setting in
		memory.
	•	Answer “Yes” to the question.

Changing the settings of basic items

The factory default setting is to display only the basic items. To change the settings of basic items, proceed as follows.

1 Press the M/MARK1 or m/MARK2 button to select the required item.

Example: Screen display when DISPLAY

CONTROL is selected

SETUP MENU

OPERATIONAL FUNCTION

DISPLAY CONTROL

SETUP BANK OPERATION

MENU GRADE :BASIC

2 Press the ,/OUT button.

This displays menu level 2 for the menu item selected in step 1.

Example: Screen display of the second level of the DISPLAY CONTROL menu

SETUP MENU

DISPLAY CONTROL
CHARA.DISPLAY		:ON
CHARA.POSITION
CHARA.TYPE		:WHITE
CHARA.VSIZE		:x1
DISPLAY INFO		:T&STA
SUB STATUS		:OFF
MENU DISPLAY		:WHITE
BRIGHTNESS		:55%
ALARM		:ON
	Current		setting

3 Press the M/MARK1 or m/MARK2 button to select the required item.

For menu items on level 3, press the ,/OUT button to go to level 3, then press the M/MARK1 or m/ MARK2 button to select the item whose setting you wish to change.

Example: Screen display when SUB STATUS is selected

96 System Menu