Sony PDW-F70 External Synchronization

XLR cable

Ferrite core (supplied)

120 to 150 mm

When the diameter of the XLR cable is too large

2Chapter	to loop
	If the diameter of the XLR cable is so large that is difficult
Preparations	to loop the cable through the ferrite core, simply pass it
	through the core without looping. In this case, use a
	binding strap (not supplied) to at the specified position, as
	shown in the figure below.

120 to 150 mm

XLR cable

Binding strap (not supplied)

Ferrite core (supplied)

Note

This unit will not meet the requirements of the CISPR 22 Class B electromagnetic interference standard if ferrite cores are not attached to XLR cables.

External Synchronization

This unit synchronizes as shown in the following table, according to the presence or absence of signals input to the HDSDI INPUT connector, the presence or absence of signals input to the REF VIDEO INPUT connector, and the setting of the V INPUT item on the HOME page of the function menu (see page 81).

Signal	Signal	V INPUT	External
input to	input to	setting	synchronization
HDSDI	REF VIDEO
INPUT	INPUT
connector	connector
Yes	Yes	HDSDI	Synchronize to
			HDSDI input
		SG	Synchronize to REF
			VIDEO input
Yes	No	HDSDI	Synchronize to
			HDSDI input
		SG	No external
			synchronization
No	Yes	HDSDI	Synchronize to REF
			VIDEO input
		SG
No	No	HDSDI	No external
			synchronization
		SG
Note

There is no external synchronization for file operations by FAM connection (see page 78).

30 External Synchronization