2Analog audio signal input/output section

1 AUDIO INPUT 1/3 and 2/4 connectors

2AUDIO OUTPUT 1/3 and 2/4 connectors

3 AUDIO MONITOR connectors

AUDIO MONITOR

R L

 

AUDIO INPUT

 

AUDIO OUTPUT

1/3

2/4

1/3

2/4

aAUDIO INPUT (analog audio signal input) 1/3 and 2/4 connectors (XLR 3-pin, female)

These connectors input two channels of analog audio. You can use the A1 INPUT to A4 INPUT items on the HOME page of the function menu (see page 81) to assign the signals input to connectors 1/3 (ANALOG1) and connectors 2/4 (ANALOG2) to audio channels 1 to 4. You can set the reference input levels with the setup menu item AUDIO CONTROL >LEVEL SELECT (the factory default settings are INPUT: +4 dB, REF LEVEL: –20 dB).

bAUDIO OUTPUT (analog audio signal output) 1/3 and 2/4 connectors (XLR 3-pin, male)

These output two channels of analog audio.

For 4-channel audio, you can use the INTERFACE SELECT >AUDIO OUTPUT item of the setup menu (see page 94) to select whether to output channels 1 and 2, or channels 3 and 4 (factory default setting: channels 1 and 2).

You can set the output level with the setup menu item AUDIO CONTROL >LEVEL SELECT (factory default setting: +4 dB) (see page 93).

cAUDIO MONITOR connectors (phono jack) These output audio signals for monitoring.

You can select the channels to monitor with MONI CH and MONI SEL on page P1 of the function menu (see page 82).

3Digital signal input/output section

1HDSDI INPUT connector

2HDSDI OUTPUT connectors

 

 

 

3 SDSDI OUTPUT

 

 

 

connector

HDSDI INPUT

HDSDI OUTPUT

SDSDI OUTPUT

 

1

2

 

aHDSDI (HD serial digital interface) INPUT connector (BNC type)

This inputs HD format video and audio signals.

bHDSDI (HD serial digital interface) OUTPUT

connectors (BNC type)

These output HD format video and audio signals.

When CHAR SEL on page P1 of the function menu is set to “ON” (see page 82), information such as timecode, menu settings, and error messages is superimposed on the output signals.

cSDSDI OUTPUT connector (BNC type)

This outputs SDSDI signals downconverted from HD video input signals, or the SDSDI signals being played back or being recorded.

When CHAR SEL on page P1 of the function menu is set to “ON” or “LCD” (see page 82), information such as timecode, menu settings, and error messages is superimposed on the output signals.

4Digital audio signal input/output section

1DIGITAL AUDIO (AES/EBU) INPUT 1/2 and 3/4 connectors

DIGITAL

1/2

3/4

AUDIO

 

 

(AES/EBU)

 

 

INPUT

1/23/4

OUTPUT

2DIGITAL AUDIO (AES/EBU) OUTPUT 1/2 and 3/4 connectors

aDIGITAL AUDIO (AES/EBU) INPUT 1/2 and 3/4

connectors (BNC type)

These input AES/EBU format digital audio signals. The 1/2 connector corresponds to audio channels 1 and 2, and the 3/4 connector corresponds to audio channels 3 and 4.

Overview 1 Chapter

Names and Functions of Parts 19